Snapshot 913
Normalized text
Scripts and page chrome removed; this is what change detection compares.
HONEYWELL DATA PROCESSING AGREEMENT (“DPA”) EXHIBIT
This DPA forms part of the Agreement and applies to the extent that Honeywell processes Company’s
Personal Data on behalf of the Customer in the course of providing the Services. The DPA does not
apply where Honeywell is the Controller. All capitalized terms not defined herein shall have the meaning
set forth in the Agreement. In event of conflict between this DPA and the Agreement, this DPA shall
control with respect to its subject matter.
1. Definitions
“Agreement” means the written or electronic agreement between Company and Honeywell for the
provision of the Services to Company.
“Applicable Privacy Laws” means applicable data protection, privacy, breach notification, or data
security laws or regulations.
“Company Personal Data” means Personal Data Processed by Honeywell on behalf of Company
in connection with Honeywell’s performance of its obligations under the Agreement.
“Subprocessor” means any Processor engaged by Honeywell for the provision of the Services
including Honeywell affiliates and service providers.
Regardless of Applicable Privacy Laws, the terms “Controller”, “Data Subject”, “Personal Data”,
“Processor” and “Processing” will have the meaning defined in the General Data Protection
Regulation EU 2016/679 ("GDPR") or analogous definitions in Applicable Privacy Laws.
2. Processing
2.1. Role of the Parties. As between Honeywell and Company, Honeywell will Process Company
Personal Data under the Agreement as a Processor acting on behalf of the Company as the
Controller (except where Company acts as a Processor in which case Honeywell is a
Subprocessor).
2.2. Instructions. Honeywell will Process Company Personal Data in accordance with Company’s
documented instructions unless required to so do by applicable law to which Honeywell is
subject. Company agrees that the Agreement and any subsequent statements of work are its
complete and final instructions to Honeywell in relation to the Processing of Company Personal
Data. Any additional or alternate instructions must be agreed between the Parties in writing,
including the costs (if any) associated with complying with such instructions. Honeywell will
inform Company if it is of the opinion that a Company instruction infringes Applicable Privacy
Laws unless applicable law prohibits such notification on important grounds of public interest.
2.3. Purpose limitation. Honeywell will only process Company Personal Data as permitted under
the Agreement and Applicable Privacy Laws. Honeywell will not sell (as the term is defined
under Applicable Privacy Laws) any Company Personal Data to any third party.
2.4. Processing Details. The subject matter, duration of Processing, nature and purpose of
Processing, the type of Company Personal Data and categories of Data Subjects are specified
in Annex 1 to this DPA.
2.5. Compliance with Laws. Company warrants that its Processing of Company Personal Data
complies with all Applicable Privacy Laws and any processing instructions it issues to
Honeywell under the Agreement.
3. Subprocessors
3.1. Authorisation to use Subprocessors. Honeywell engages Subprocessors to provide certain
services under the Agreement on its behalf. Company authorizes Honeywell to use
Subprocessors located in any jurisdiction to Process Company Personal Data provided
Honeywell contractually requires Subprocessors to abide by terms no less restrictive than this
DPA. Honeywell will be liable to the Company for the performance of its Subprocessor’s
obligations under the Agreement.
3.2. Notification of intended changes. Honeywell will make available to Company a list of
Subprocessors that it engages to support the provision of the Services upon written request.
1
Honeywell will notify Company of any changes to its Subprocessors (“Subprocessor Notices”)
and will give Company ten business days to object after receipt of the notification. If Company
legitimately objects to a Subprocessor on reasonable data protection grounds and the Parties
do not resolve the matter within one month following notification of the same to Honeywell,
Honeywell may terminate all or part of the Order Form impacted by the new Subprocessor
without penalty on written notice.
3.3. Company is responsible for informing Honeywell of the email address to which Subprocessor
Notices must be sent, by emailing HoneywellPrivacy@Honeywell.com with “Subprocessor
Subscribe” in the subject line, giving details of the contact person, and the Service for which
Subprocessor Notices are required. Company is also responsible for informing Honeywell of
any changes to those details.
4. Security
4.1. Security Measures by Honeywell. Honeywell will use appropriate technical and organizational
measures to protect Company Personal Data as required by Applicable Privacy Laws and will
follow industry-standard security practices. A list of the technical and organizational measures
implemented by Honeywell is attached to this Data Processing Exhibit as Annex 2.
(“Information Security Measures”). Honeywell may update or modify the Information Security
Measures provided that such updates and modifications do not result in a material degradation
of the overall security of the Services provided under the Agreement.
4.2. Security Measures by Company. Company is solely responsible for determining whether the
Information Security Measures meets its requirements and provides a level of security
appropriate to the risks of Processing such Company Personal Data. Company acknowledges
and agrees that the level of security provided by the Information Security Measures is
appropriate to the risk inherent in the Processing by Honeywell on Company’s behalf.
Company is responsible for configuring the Services in a manner which enable Company to
comply with Applicable Privacy Laws, including the implementation of appropriate technical
and organisational measures.
4.3. Access and Confidentiality. Honeywell will ensure that only authorised personnel who have
committed themselves to confidentiality or are under an appropriate statutory obligation of
confidentiality may access Company Personal Data for the purposes of performing the
Services under this Agreement.
4.4. Prohibited Data. Customer acknowledges and agrees that the Agreement may prohibit the
submission of certain types of Personal Data (such as a PCI or health information) to the
Services. Customer will not submit to the Services any Customer Personal Data which is
regulated by COPPA, FERPA and HIPAA unless authorised to do so in writing by Honeywell.
5. Security Incident. Honeywell will notify Company without undue delay after becoming aware of a
breach of security leading to the accidental or unlawful destruction, loss, alteration or unauthorized
access, disclosure or use of Company Personal Data while processed by Honeywell (each a
“Security Incident”) in relation to the Services under the Agreement to assist Company with its
reporting or notice obligations under Applicable Privacy Laws. Honeywell will investigate the
Security Incident and provide Company with relevant information about the Security Incident as
required under Applicable Privacy Laws. Honeywell will use reasonable efforts to assist the
Company in mitigating, where possible, the adverse effects of any Security Incident. Honeywell’s
notification to Company of a Security Incident will not be deemed an acknowledgement of fault or
liability.
6. Compliance
6.1. Demonstrating compliance. Upon Company’s written request and subject to obligations of
confidentiality, Honeywell will provide to Company all information necessary, including by
relevant certifications, to demonstrate its compliance with this DPA. Company (or an
independent auditor mandated by Company) may audit Honeywell’s compliance with such
obligations once per year at the applicable facility or if there are indications of non-compliance
2
with the terms of this DPA ("Audits").
6.2. Audits. Audits will only be performed following Company’s written request at least ninety (90)
days prior to the proposed start date and Company providing a reasonably detailed audit plan
describing the proposed scope, start date and duration. Before the commencement of an Audit,
the Parties will agree on a final Audit plan. Audits will be conducted during Honeywell's regular
business hours, subject to the published policies of the audited facility, and may not
unreasonably interfere with business activities. The personnel conducting the Audit on behalf
of Company or an independent auditor mandated by Company must enter into an appropriate
written confidentiality agreement acceptable to Honeywell prior to conducting the Audit and will
be accompanied by at least one member of Honeywell staff at all times. To preserve the
security of the Honeywell organization and its companies, Honeywell reserves the right to not
share information that could expose or compromise its security, privacy, employment policies
or obligations to other customers or third parties or share confidential information. Records
may not be copied or removed from Honeywell facilities. Company will generate and provide
Honeywell with an audit report within three months after the Audit. All information obtained or
generated in connection with an Audit, including audit reports, must be kept strictly confidential
and may only be used for the purposes of confirming Honeywell’s compliance with its
obligations under this Data Processing Exhibit. Company will pay or reimburse Honeywell's
reasonable costs for allowing for and contributing to Audits.
7. Data Transfers
7.1. Authorisation for Data Transfers. Company hereby authorizes Honeywell and its
Subprocessors to transfer Company Personal Data to locations outside of its country of origin
for the performance of the Agreement provided that Honeywell ensures such data transfers
comply with Applicable Privacy Laws.
7.2. Data Export Restrictions. If Honeywell transfers Company Personal Data from the European
Economic Area (“EEA”), UK, Switzerland or from any other jurisdiction that restricts the cross-
border transfer of Company Personal Data to locations outside that jurisdiction, Company shall
be bound by the Standard Contractual Clauses for the transfer of personal data to third
countries pursuant to Regulation (EU) 2016/679 including the provisions in Modules 2 and 3,
as applicable, and the UK’s International Data Transfer Addendum to the EU Commission
Standard Contractual Clauses made under s119 A(i) of the UK’s Data Protection Act 2018
(“Processor SCCs”) in the capacity of “data exporter”, and Honeywell in the capacity of “data
importer” as those terms are defined therein. The Processor SCCs will be deemed to have
been signed by each Party and are hereby incorporated by reference into the Agreement in
their entirety as if set out in full as an annex to this Agreement. The Parties acknowledge that
the information required to be provided in the appendices to the Processor SCCs is set out in
Annex 1 below as a “description of the transfer” and “ Security Measures” as a “description of
the technical organisational measures” in Annex 2. If there is a conflict between the provisions
of this DPA or the Agreement and the SCCs, the SCCs will prevail.
8. Cooperation. Honeywell will cooperate with Company to respond to any requests, complaints or
inquiries from data subjects, supervisory authorities, or other third parties, conduct a privacy impact
assessment and prior consultation with supervisory authorities, provided that Company reimburse
Honeywell for all reasonably incurred costs. If Honeywell receives a data subject request relating to
Company Personal Data, Honeywell will refer such data subject request to Company. Honeywell
will not respond to the data subject request unless required by applicable law.
9. Termination. Upon termination of the Agreement, at Company’s option, Honeywell will return,
delete or anonymize all Company Personal Data except to the extent Honeywell is required by
applicable law to retain Company Personal Data or for compliance, audit or security purposes in
which case the terms of this DPA will continue to apply to the retained Company Personal Data.
The DPA and the Processor SCCs will terminate automatically upon the deletion or anonymization
of the Company Personal Data processed under this DPA.
3
ANNEX 1
DESCRIPTION OF PROCESSING AND TRANSFER ACTIVITIES
(MODULE 2: CONTROLLER TO PROCESSOR)
A. LIST OF THE PARTIES
Controller / Data Exporter: The full name, address and contact details for the Party is set out in the
Agreement.
Processor / Data Importer The full name and address of the Honeywell entity specified in the
Agreement.
Contact: Chief Privacy Officer
Email: HoneywellPrivacy@honeywell.com
B. DETAILS OF PROCESSING/TRANSFER
CATEGORIES OF DATA Dependent on the Data Exporter’s use of the Data Importer’s Services, the
SUBJECTS Data Exporter may elect to include Personal Data from any of the following
types of data subjects:
• Employees and staff (including applicants, contractors, temporary
workers, trainees, interns, directors, company officers, shareholders,
and agents)
• Channel partners, distributors, sales partners, business partners and
service providers
• Customers and their staff (including applicants, contractors, temporary
workers, trainees, interns, directors, company officers, shareholders,
and agents)
• Users of the Data Importer’s Services (including end users of
Customers and other third parties)
• Any other data subject as described in the Agreement which is in the
scope of the Services provided.
CATEGORIES OF PERSONAL Dependent on the Data Exporter’s use of the Data Importer’s Services, the
DATA Data Exporter may elect to include Personal Data from any of the following
categories of Personal Data:
• Business contact information (such as name, email address, gender,
job title, country of residence, mobile phone number and location)
• Employment data (such as compensation, qualifications, attendance
data, curriculum vitae, employment history, education history, work
permit, citizenship, and residency information)
• Unique identification numbers and signatures (such as government
identifiers, cookie identifiers or driver’s license number)
• Biometric information (such as facial recognition, fingerprints, and iris
scans)
• Commercial Information (such as history of purchases, special offers
and payment history)
• Support Services (such as personal data collected through the
provision of support services online or interactive communications)
• Information related to data subject’s use of IT assets (such as
username, password, security question, IP address, login information,
credentials, data relating to the sending, routing and delivery of emails
whilst providing support services, and incidental access of the content
of email communications etc.)
• Profiling (such as behaviour observed based on unique identifiers,
patterns of hardware, software, device and internet usage, IP
addresses, domains, apps installed, browsing and support logs etc.)
• Location data (such as geo-location, network data, location data
derived from use of wi-fi access points)
• Device identification (such as UUID, IMEI-number, SIM card number,
MAC address);
• Training and development (such as trainee data, training history,
individual development plans, trainer information and training
schedules)
• Photos, video, voice, and audio (for example webcam or voice
recordings)
• Any further Personal Data contained in an application or IT system
which is in scope of the Services provided.
4
SPECIAL CATEGORIES OF DATA Dependent on the Data Exporter’s use of the Data Importer’s Services, the
(IF APPLICABLE) Data Exporter may elect to include Personal Data from any of the following
special categories of Personal Data which is in the scope of the Services:
Racial or ethnic origin, political opinions, religious or philosophical beliefs,
trade union membership, genetic data, biometric data for the purpose of
uniquely identifying a natural person, data concerning health, data
concerning a natural person’s sex life or sexual orientation, or data relating
to criminal convictions or offences).
FREQUENCY OF THE TRANSFER Dependent on the Data Exporter’s use of the Services, the Data Importer
may host, remotely access, or otherwise transfer Personal Data on a one-off
basis or on a continuous basis when providing the Services as described in
the Agreement.
NATURE OF THE PROCESSING Data Importer and its subprocessors are providing Services or fulfilling
contractual obligations to the Data Exporter as described in the Agreement.
These Services may include the processing of Personal Data by Data
Importer and/or its subprocessors.
PURPOSE OF Dependent on the Data Exporter’s use of the Data Importer’s Services, the
PROCESSING/TRANSFER Data Exporter’s Personal Data is processed and transfer is made for the
following purposes:
• Relationship management: facilitating communication with customers,
employees and users for the services performed under the Agreement
• Service management: the provision and deployment of products and
related services, consultancy, data migration, installation of systems
and software, provision of support and maintenance services, training,
channel and/or supplier administration and support
• Channel: administration and management of channel partners,
distributors and/or sales partners
• Marketing: administration and management of marketing databases for
direct marketing purposes, conduct of marketing activities/campaigns
• Management of electronic identity and communication: identity
management, security management, confidentiality of data exporter and
data exporter’s customers and employees
• Operating and managing the IT and communications systems,
managing product and service development, improving existing and
developing new products and services, research and development,
managing company assets, allocating company assets and resources,
strategic planning, project management, business continuity
• Training: administration of learning managements systems, facilitation
of onsite and online learning
• Research in any field including scientific and technical research
• Any other scope and purpose as described in the Agreement.
RETENTION The Data Exporter’s Personal Data will be retained in accordance with the
Agreement unless applicable law requires storage of the Personal Data for
a longer period.
COMBINATION OF DATA Personal Data received from the Data Exporter is combined with Personal
Data collected by the Data Importer unless otherwise prohibited by the
Agreement.
TRANSFER TO SUBPROCESSORS The Data Importer may process and transfer Personal Data to
subprocessors in relation to the performance of the Agreement and in
accordance with the following scope:
• Subject Matter
o The subject matter of the processing under the Agreement is the
Personal Data that is specified above.
• Nature of the processing
o Data Importer and its subprocessors are providing Services or
fulfilling contractual obligations to the Data Exporter as described
in the Agreement. These Services may include the processing of
Personal Data by Data Importer and/or its subprocessors.
• Duration
o The duration of the processing under the Agreement is determined
by the Data Exporter and as set forth in the Agreement.
5
C. COMPETENT SUPERVISORY AUTHORITY
The competent supervisory authority shall be the supervisory authority which has jurisdiction in relation to the
activities of the Data Exporter as controller under applicable privacy laws or, where it is not established in applicable
jurisdiction, where its representative has been established pursuant to applicable legal requirements or, if the Data
Exporter does not have to appoint a representative, where the data subjects whose Personal Data are transferred
are located.
D. GOVERNING LAW AND CHOICE OF FORUM
GOVERNING LAW For the purposes of Clause 17 of the SCCs, the Parties select the law of
Ireland.
CHOICE OF FORUM For the purposes of Clause 18 of the SCCs, the Parties agree that the courts
of Ireland will have jurisdiction.
E. OTHER
Where the SCCs identify optional For Clause 7 (Docking Clause), the optional provision will apply.
provisions or provisions with multiple
options the following will apply: For Clause 9(a), option 2 will apply. The Parties will follow the process
agreed in Section 3 (Subprocessing) of the Honeywell Data Processing
Exhibit.
For Clause 11(a) (Redress) – the optional provision will not apply.
6
ANNEX 2
INFORMATION SECURITY MEASURES
Honeywell is committed to protecting personal and customer information. This appendix describes
Honeywell’s security measures for safeguarding personal and customer information that is processed
within Honeywell Enterprise infrastructure. Any additional safeguards are outlined in the statement of
work or IT Security exhibit as agreed with respective customer.
Honeywell has implemented the described measures across the Honeywell Enterprise-Wide Network
(HEWN), for the security of personal and customer data.
Categories Practices
Compliance and Certifications
Maintain an enterprise-wide information security policy framework to safeguard the
confidentiality, integrity, and availability of all information assets and ensure regulatory,
operational and contractual requirements are fulfilled. The control framework is aligned to
NIST SP 800-171 controls and DoDs Cybersecurity Maturity Model Certification (CMMC)
practices and includes development and policies, standards and procedures for suitable
Audits and and applicable implementation. Compliance with these established security controls sets
Third-Party the foundation for protecting all Honeywell assets and interconnected systems.
Certification
Right to Audit
Third-party audit requirements are negotiated and executed per contract terms and
conditions.
Audit Finding Remediations
Remediates audit findings by raising an issue. Each issue is tracked through a governance
process with a defined remediation plan and ownership assigned.
Policies and Standards
Policies and standards are governed at a global level to comply with a myriad of
requirements and cannot be changed without consideration and coordination.
Threat Intelligence
Threat intelligence process in place with constant evaluations of our adversaries to
determine the most effective controls.
Risk Management
Risk assessments are handled by multiple functions in the enterprise. Each function
identifies different sources of risk to Honeywell and applies a standardized prioritization.
Governance, Risk mitigation plans are recorded and implemented through the risk management and
Risk, and compliance issue management processes. All the risks are entered into the Risk Register
Compliance and assigned mitigation plans, which are tracked with the owner.
Compliance Assessments
Risk and Compliance teams operate continuously to test controls, identify issues, facilitate
remediation, and report progress and issues to senior leadership, including detailed
dashboards and regular CIO briefings. The types of assessments conducted differ by
service, process and assets. There are annual standard assessments, pro-active deep-
dive assessments, and risk analysis/assessments conducted on a periodic basis.
Security Exceptions
Robust security exception process in place to service the global organization to assist the
efficient and appropriate reduction of risk in the short term (less than a year) when scenarios
such as non-whitelisted software must be addressed and mitigated.
Authorization
Enforce authorization controls for remote and wireless access to the company network
prior to allowing such connection. System access and privileges are limited based on the
types of transactions and functions authorized users are permitted to execute.
Access Control
Least Privileges
Access to resources are limited to those who have a specific need to access systems and
data. User access is only approved for the minimal requirements or least privilege
necessary for an individual to perform job responsibilities.
7
Categories Practices
Identification
Secure login with unique identification and authentication for all users attempting to access
company systems.
Authentication
Enforce multi-factor authentication for remote and admin access with mandates for complex
passwords.
Account Management
Role-based access controls are firmly in place. Manage identification, authentication, and
access rights for all users. Maintain segregation of duties through role-based access control
across all functions to reduce the risk of malevolent activity without collusion. Reviews of
active users are conducted at minimum on a quarterly basis to ensure only authorized
individuals have access to information systems.
Account Lockout and Revocation
Limit unsuccessful information system access after consecutive invalid login attempts.
Screens and terminals protected against unauthorized access, no matter where they may
be located; office, home, travel, etc.
Active Directory access contingent upon employment status, when there is a change in
status in the HR system, access is automatically revoked.
Architecture
Defense in depth strategy is employed, including network hardening/patching, centralized
log collection and correlation, and deny all/permit by exception firewall configuration in a
three-tier demilitarized zone architecture. All Internet traffic is routed only through data
center Internet gateways.
Boundary Protection
Boundary protection is through managed firewalls (e.g., Checkpoint, DMZ, content filtering
Network Security using proxies, Cisco TrustSec used for policy enforcement). Network perimeter security
through intrusion detection and prevention systems and state of the art firewalls.
Network Segmentation
Internal boundaries are managed through physical firewalls to segment Specific Use
Networks (SUNs) from the enterprise network.
Software-Defined Wide Area Network (SD-WAN)
SD-WAN provides rapid isolation of network segments from bad actors during incident
management.
Asset Lifecycle Management
Information asset inventory and protection processes are designed to protect information
throughout the lifecycle including creation, use, processing, storage, transmission and
destruction.
Asset Inventory
Maintain an inventory system with a centralized configuration management database
(CMDB) repository in which configurations common across multiple systems within the
enterprise are stored.
Asset and Device Hardening
Configuration Honeywell follows approved configuration baseline security standards. The standard
Management defines the mandatory tools that is approved by the Standards Council including security
stakeholders. All functions, ports, protocols and services are documented in the local
system run book, and each entry identifies a business requirement that justifies the
service.
Configuration Management
Maintain centralized configuration management repository in which configurations
common across multiple systems within the enterprise are stored in a repository,
versioned, and deployed. Baseline configuration settings for all IT products are
documented in build books.
Change Management
8
Categories Practices
All changes, including patches related to infrastructure and applications within the
production environment, are managed in a controlled manner. Changes are logged,
assessed, and authorized prior to implementation and reviewed against planned
outcomes following implementation.
Asset Destruction
Information assets are securely destroyed when no longer required including but not limited
to disk drives, hardcopy documents, USB devices, network devices, mobile devices, copiers
and optical media.
Operational Policy
Control and monitor user workstations using a Windows Group Policy Object (GPO). Each
time a user logs in, the device is scanned, and baseline operating system settings are
applied. Changes to the workstation configurations are proposed and reviewed monthly.
Approved changes are tracked in the inventory system.
Software Authorization and Prohibitions
Approved software is provisioned through an automated end-user interface. Honeywell
uses a centralized desktop scanning and inventory application, which includes licensing
and entitlement management.
Encryption
Maintain strong cryptography and security protocols to protect the confidentiality and
System and integrity of data in transit. Honeywell requires network access to occur locally or through
Communications encrypted channels.
Protection
Email Protections
Deployed Domain-based Message Authentication, Reporting and Conformance (DMARC)
on all email managed domains to address the email security risk represented by so-called
email spoofing. With DMARC, external attackers cannot impersonate the Honeywell email
domain, and this helps prevent spam, spoofing and phishing.
Session Termination
Employ a 15-minute idle timeout for any device except for industrial control systems.
Mobile Device Security
Commercial Mobile Device Management (MDM) solution in place. All mobile devices are
encrypted, and password protected. This ensures any data residing on the mobile device
will be protected. MDM solution within the approved device is used to control the
environment and data.
Application Development Security
Projects follow agile development and DevOps principles, as appropriate. Rigorous pursuit
of secure coding principles in the development and coding of applications/software.
Maintenance
System Systems are maintained on a monthly patch cycle. System software components such as
Development applications, database management systems, and web server software undergo security
and Maintenance patches and version upgrades as means of software maintenance.
System Flaws
Assured compliance with Honeywell security standards. Identify, report, and correct server
flaws using automated reports and manual processes. Server flaws are addressed in an
expeditious manner by system administration and management.
Audit (Logging) and Accountability
Centralized Security Information and Event Management (SIEM) system (Splunk) collects
audit information in a single location. Within Splunk, only authorized systems
administrators (privileged users) are allowed to record, enable or disable audit events such
Security as password changes, failed logins, failed transactions, privileged usage, and credential
Operations usage.
Antivirus Protections
Maintain automatic scanning mechanisms on assets commonly affected by malicious
code. Antivirus updates for the engine and signatures must be downloaded and installed
from a centralized management infrastructure or trusted source at a minimum daily.
9
Categories Practices
Cyber Threat Awareness
Security Operations Center (SOC), Cyber Threat Intelligence group is dedicated to
monitoring and responding to cyber threat intelligence shared in both open-source and
closed-source information repositories.
Intrusion Detection and Prevention
Intrusion and prevention detection systems are configured to detect activity and provide
alerts for the high-risk protocols attempting to traverse zones of trust, as defined by
governance documents.
Monitor and Detect Anomalies and Events
Suspicious activity is detected automatically by one of the security tools (i.e., such as
intrusion detection systems, anti-virus software, system audits logs) or manually reported
by an end-user or privileged user. Event correlation and escalation capabilities are
provided by the software.
Continuous Monitoring
Security Operation Center (SOC) monitors the environment 24/7 for attacks, indicators of
attacks, or suspicious activity in many aspects of the environment (i.e., network access,
system access, emails, internet browsers).
Secure Development Lifecycle
Dedicated Software and Systems Development Engineering, Product Cyber Security,
Customer Support, Program/Project Management, and other appropriate support teams.
Application Development Security
Maintain measures to ensure all products developed in accordance with principles of
secure software development consistent with software development industry best
practices such as OWASP, CSA, IEC62443 and regulatory requirements, including,
security design review, secure coding practices, threat modelling, product security risk-
based testing and remediation requirements.
Code Signing
Product Security A Secure Development Policy is in place mandating that all software and firmware must
be signed. Where code signing is not feasible, other technologies that achieve equivalent
integrity may be used.
Security Testing
Source code reviews and security testing of hardware or software are conducted to identify
potential system flaws, with the goal of mitigating risk, protecting data, and maintaining
intended systems functionality. Requirements of security testing may include confidentiality,
integrity, authentication, availability, authorization, and nonrepudiation. Actual requirements
tested depend on the context of the security implemented by the system.
Product Security Incident Response
Honeywell’s Product Security Incident Response Team (PSIRT) minimizes customer risk
associated with security vulnerabilities.
Data Protection Program
Data Protection Program employed with a suite of tools covering classification, ownership
identification, monitoring, detection and prevention.
GDPR Compliance
Global Data Privacy Policy requires employees to comply with Data Protection Laws with
respect to the processing of Personal Data.
Data Protection Data Privacy
Personnel engaged in data processing are under a written obligation of confidentiality
and may not collect, process or use personal data without authorization. Mandates for
personal data encryption in transit and at rest.
Data Integrity
Robust information protection capabilities for all laptops, remote sessions, mobile devices
and backups are encrypted. Email encryption of external communication is available and
file shares can be encrypted on request.
10
Categories Practices
Data Loss Prevention
Control and monitor extrusion detection systems to enforce data security policies and
prevent loss of intellectual property and other Highly Confidential information.
Data Retention
Retain backup and archived electronic copies of data in its controlled information systems
for audit purposes.
Secure Document Exchange
Provide options for secure exchange documents with customers based on the sensitivity
of the information.
Media Protection
Approved selection of media, including associated information contained on that media,
requiring physical protection. Provide sufficient protection with physical access controls to
the facility where the media is stored.
Media Sanitization
Approved methods to sanitize all data unless dictated differently by local laws or customer
contractual obligations.
Removable Media
Restrict the use of portable storage devices by default and authorizes use of Honeywell-
approved, encrypted removable media, by exception, which ensures a connection with the
owner.
Data Termination
Upon written request, Honeywell will return, delete or anonymize customer data, with the
exception of archives and required retention.
Physical Security Protections
Physical security perimeters (fences, walls, barriers, guards, gates, electronic
surveillance, physical authentication mechanisms, reception desks and security patrols)
are implemented to safeguard sensitive information and information systems.
Data Center Environmental Controls
Tier 3 global data centers meet relevant industry standards. Physical controls are tested
regularly by management as well as periodically validated through audits and risk
assessments.
Limit Physical Access
Physical access to facilities and data centers is restricted in order to protect hosted
information, applications, systems, and infrastructure. Controlled access points limit
Physical and physical access to IT assets. All external access points require approved security controls.
Environmental Access to the site is controlled by an approved mechanical and electronic access control
Security system.
Visitor Access Control
All visitors must provide a government issued ID to enter the facility and be issued and
wear a temporary access badge. Identification badges are used, and visitors must be
accompanied by an escort. Visitor access is subject to approval and is maintained in
accordance with Honeywell retention policy.
Surveillance
Where necessary, security cameras and security guards are utilized to observe and
enforce access controls, protection of Honeywell employees, and Honeywell property.
Intrusion Detection and Prevention
The audit trail of activities captured via CCTV or access control systems is retained for a
minimum of thirty (30) days or as permitted by applicable law.
Onboarding New Hires
Personnel Hiring procedures for new employees require the completion of a detailed application
Security and form as allowed by local law and appropriate for job roles:
Training • Educational verification;
• Previous employment verification;
11
Categories Practices
• Social Security Number, National Identifier or Personal Identity Code validation;
• Drug screen;
• Criminal history check.
Awareness and Training
Annual compliance training for employees to complete an online course and pass an
assessment covering information security and data privacy. The security awareness
program may also provide materials specific to certain job functions.
Personnel Termination
Terminations are initiated by the employee's supervisor. Cyber access is contingent upon
employment status. Access revocation is immediately and automatically triggered by
changes to status of employees or contractors in the HR system.
Vulnerability Scanning
Honeywell uses a standardized vulnerability management tool to scan, report, and check
for compliance against common vulnerabilities, newly identified vulnerabilities and open
services. Complete internal and external vulnerability scans are conducted monthly.
Penetration Testing
Honeywell’s Center of Excellence (COE) for penetration testing (red and purple teams
along with added technology assessments function) continually test and evaluate through
Vulnerability research and application of innovative security technologies.
Management
Remediation and Patch Management
Maintain remediation and mitigation plans for identified vulnerabilities and corresponding
corrective measures. Asset owner documents acknowledgement of the risk and the IT
business manager reviews and approves the remediation plan.
Systems are maintained on a monthly patch cycle. System software components such as
applications, database management systems, and web server software undergo security
patches and version upgrades as means of software maintenance.
Incident Response Plans
Maintain incident response plans. Incident response procedures exist for security and data
protection incidents, which includes incident analysis, containment, response,
remediation, reporting and the return to normal operations.
Incident Incident Identification and Reporting
Management 24/7 Security Operations Center with array of tools and technologies for logging, detection,
and analysis of system usage with rapid reporting requirements in accordance with US DoD
DFARS 252.204-7012.
Supplier Incidents
Honeywell manages supplier incidents per reporting requirements in DFARS 252.204-7012.
Resilience
Replicate stored data between core data centers to add resiliency and further protect the
data. Backups include data deemed necessary for full system restoration on business-
critical systems.
Business Backup and Recovery
Continuity Routine back-up of databases and systems. Backup frequency is dictated by a standard
Management rotation which is used globally within the Honeywell environment Backup and store data
on local disk storage systems to allow for quick recovery in the event of a restore request.
Emergency Response and Disaster Recovery Plans
Maintain business continuity and disaster recovery plans to ensure a minimum level of
continuity for the delivery of critical products and services during a significant interruption.
Vetting
Supply Chain Complete due diligence and vetting procedures on third party vendors and contractors
Risk including review of relevant cyber and physical controls prior to granting access to
Management Honeywell assets.
Non-Disclosure Agreements
12
Categories Practices
Contractors and other third parties with access to networks are required to sign a non-
disclosure agreement.
Security Requirements
Security terms and conditions are based on the scope of the product or service to be
provided to Honeywell and the type of access required, including all applicable Honeywell
security policies.
Supplier Risk Management
Risk assessments of Suppliers are conducted for any agreement where a Supplier will
need access to a Honeywell asset, either physical (building, site, computer, etc.) or cyber
(information asset) in order to fulfill the agreement.
13