Snapshot 219985
Raw (normalized text)
Scripts and page chrome removed; this is what change detection compares.
ICONIK – DATA PROCESSING AGREEMENT
1. INTRODUCTION AND OBJECTIVE
1.1. The Customer and the Supplier have entered into an agreement (the "Main
Agreement") whereby Supplier shall provide services to the Customer, This Appendix 1
– Data Processing Agreement (“Processor Agreement”, “Data Processor
Agreement” or “Data Processing Agreement”) forms part of the Main Agreement and
governs the processing of Personal Data in connection with the Main Agreement.
Except as may be otherwise required under Data Protection Laws, the Customer, on
behalf of any other Controller (e.g., where applicable, companies within its company
group or other Controllers designated by the Customer and as may be agreed by the
Supplier in writing from time to time), shall serve as a single point of contact for the
Supplier in all matters under this Data Processor Agreement and shall be responsible
for the internal coordination, review and submission of instructions or requests to the
Supplier as well as the onward distribution of any information, notifications and reports
provided by the Supplier hereunder.
1.2. Unless stipulated otherwise, the provisions of the Data Processor Agreement shall take
precedence over the provisions of the Main Agreement. In the event of a conflict
between the Standard Contractual Clauses (as defined below, as applicable) and the
UK GDPR Addendum (as defined below, as applicable) on the one hand and the
provisions of the Main Agreement and/or this Data Processor Agreement on the other
hand, the SCCs and the UK GDPR Addendum shall prevail. In the event of conflicting
terms between the UK GDPR Addendum and the SCCs, then the UK GDPR Addendum
shall prevail, with respect to its scope of application.
1.3. This Data Processor Agreement is entered pursuant to the GDPRs requirement that
there shall be a written agreement on the Processor's Processing of Personal Data on
behalf of the Controller. This Data Processor Agreement also governs the technical and
organisational measures that the Supplier and its potential Subcontractors are to
implement and maintain for the protection of Personal Data.
1.4. This Data Processor Agreement is valid for as long as the Main Agreement is in force
between the parties, and thus terminates when the Main Agreement ends unless the
parties have agreed otherwise.
2. DEFINITIONS
2.1. “Customer” means the entity that has entered into a contract with the Supplier and is
defined as the “customer” in the Main Agreement. The Customer shall, for the purpose
of this Processor Agreement, include, where applicable, also entities within the
Customer’s group of companies.
2.2. “Controller” means the party that determines the purposes and means of processing
Personal Data, acting alone or with others.
2.3. “Data Protection Laws” means the applicable laws that aim at protecting the
fundamental rights and freedoms of individuals, and specifically their privacy. They
include the Customer's national legislation, where applicable, and Regulation (EU)
2016/679 of the European Parliament and of the Council (“GDPR”)”).
2.4. “Data Subject” means an identified or identifiable natural person, as defined under the
Data Protection Laws.
2.5. “Instruction” means written instructions for the processing of personal data by the
Customer. Such instructions are provided in this Data Processor Agreement but may be
updated or modified from time to time by separate written instructions from the
Customer.
2.6. “Personal Data” means any piece of information that refers to an identified or
identifiable natural person, as defined under the Data Protection Laws.
2.7. “Processing” means an action or combination of actions concerning Personal Data, as
defined in the Data Protection Laws.
2.8. “Processor” means the party that processes personal data on the Controller’s behalf.
2.9. “Security Breach” means a breach of security leading to the accidental or unlawful
destruction, loss, alteration, unauthorised disclosure of, or access to, Personal Data that
is Processed under the Main Agreement.
2.10. “Standard Contractual Clauses” or “SCCs” means the standard contractual clauses
based on the European Commission Decision (EU) 2021/914 of 4 June 2021 on
standard contractual clauses for the transfer of personal data to third countries pursuant
to Regulation (EU) 2016/679 of the European Parliament and of the Council (GDPR) or
any subsequent version or amendment thereof released by the Commission (which
shall automatically apply), including their Annexes, as individualised hereto in Appendix
3.
2.11. “Subcontractor” means any third party which the Processor engages to carry out its
obligations under this Data Processor Agreement in accordance with Section 6, and
which through this engagement Processes Personal Data for which the Customer is the
Controller.
2.12. “Supplier” is the iconik company identified as such in the Main Agreement.
2.13. “Transfer” means a cross-border transfer of Personal Data to territories outside the
EEA in accordance with Section 11.
2.14. “UK GDPR Addendum” means the template Addendum issued by the Information
Commissioner and laid before Parliament in accordance with S119A of the Data
Protection Act 2018 on 2 February 2022, as may be revised from time to time, and as
individualized hereto in Appendix 3.
3. PROCESSING OF PERSONAL DATA
3.1. Purpose and categories of Processing and types of data processed. The nature
and purpose of the Processing, the type of Personal Data and the categories of Data
Subjects covered under this Data Processor Agreement are specified in Appendix 1.
3.2. Controller. Without affecting any of the foregoing, the Customer is the Controller for
Personal Data that the Customer shares with the Supplier or which is otherwise
Processed by the Processor under this Processor Agreement. The Customer is
responsible for ensuring that the Personal Data is collected legally, and for the accuracy
and quality of the Personal Data. The Customer holds all rights to the Customer’s Data
and the Supplier receives no rights to the Customer’s Data.
3.3. Processor. The Supplier and its Subcontractors are Processors for the Processing of
Personal Data under the Main Agreement and shall only process Personal Data on
behalf of the Customer and in accordance with the Customer’s Instructions. The
Supplier is responsible for ensuring that Subcontractors that it engages only Process
Personal Data in accordance with the Data Processor Agreement and the Data
Protection Laws.
3.4. Instructions. The Customer is responsible for giving the Supplier Instructions for the
Processing of Personal Data. The Supplier shall only manage the Customer's Personal
Data in accordance with this Data Processor Agreement and Instructions given by the
Customer from time to time. If the Supplier deems that an instruction is contrary to the
requirements of the Data Protection Laws, the Supplier shall notify the Customer thereof
without delay. The Supplier shall for the avoidance of doubt not be obliged to perform a
certain measure if it is evident, according to the Supplier´s reasonable assessment, that
it would result in a breach of Data Protection Laws. The Supplier shall however not be
obliged to perform own investigations or surveys in order to establish whether there is a
breach or not, or whether the Instructions comply with applicable laws or not.
3.5. The Controller’s original Instructions to the Processor regarding the object and duration
of the Processing, the nature and purpose of the Processing, the type of Personal Data
and the categories of data subjects are listed in this Data Processor Agreement and in
Appendix 1.
3.6. Remuneration. The Supplier is entitled to remuneration on a time and material basis for
any added work caused by new instructions given by the Customer (or additional work
otherwise caused) pursuant to section 3.4 or other added work not expressly
undertaken by the Supplier herein.
4. SUPPLIER’S PERSONNEL
4.1. Confidentiality. The Supplier is responsible for ensuring that Supplier’s and its
Subcontractors’ personnel who Process Personal Data for which the Customer is the
Controller shall maintain secrecy, have received suitable training on Personal Data and
are bound by non-disclosure agreements. The obligation of confidentiality shall remain
in force even after this Data Processor Agreement has otherwise cease to be in force.
Otherwise, what is stated in the Main Agreement shall apply to the Supplier's obligation
of confidentiality.
4.2. Restricted access. The Supplier is responsible for ensuring that only the personnel of
the Supplier and the Subcontractor who need the Personal Data to fulfil the Supplier's
commitment under the Main Agreement shall have access to the Personal Data.
5. PROTECTION OF PERSONAL DATA
5.1. Technical and organisational measures. The Supplier shall take the technical and
organisational measures for the protection of the Personal Data that are appropriate
with regard to the sensitivity of the Personal Data; the particular risks that exist; existing
technical capabilities and the costs of implementing the measures. The Personal Data
shall be protected from any type of unauthorised Processing such as change,
destruction or unauthorised access and dissemination. The Supplier, accordingly,
undertakes to take all the measures stipulated in Article 32 of the GDPR. The Supplier
shall be prepared to comply with a competent authority’s decision on measures to
comply with the Data Protection Laws’ security requirements.
5.2. Rights of the Data Subject. The Supplier shall notify the Customer without delay if the
Supplier receives a request from a Data Subject regarding his or her rights, such as
information, correction or deletion of the Data Subject’s Personal Data. The Supplier
shall not respond to such a request without the Customer's written consent, except for
the purpose of notifying the Data Subject that the request has been received and
forwarded to the Customer. The Supplier shall assist and help the Customer in
managing Data Subjects’ inquiries and rights, unless the Supplier is prevented from
doing so by law or by official decision.
5.3. The Supplier shall assist the Customer in fulfilling its duties as a Controller of Personal
Data to respond to requests regarding the registered user’s rights pursuant to
administrative procedures and measures adopted by the Supplier. The Supplier shall
further render assistance to the Customer, and perform measures, as required under
Article 28 (3) (a)-(h) of the GDPR.
5.4. Official communications. The Supplier shall notify the Customer without delay if a
government authority contacts the Supplier regarding or pertinent to the Personal Data
managed under the Main Agreement, unless bound by law not to provide such a
notification. At the Customer's request, the Supplier shall, to a reasonable extent, help
the Customer with such an official communication, and otherwise provide information so
that the Customer is able to respond to the official communication within a reasonable
period of time. The Supplier has no right to respond on the Customer’s behalf or act in
the Customer's name.
5.5. Remuneration. The Supplier is entitled to remuneration on a time and material basis for
any work performed assisting the Customer to fulfil its obligations in relation to Data
Subjects and authorities regarding Data Protection, unless otherwise provided under
Data Protection Laws.
6. SUBCONTRACTORS
6.1. Use of Subcontractors. The Supplier may engage Subcontractors for the Processing
of Personal Data under the Main Agreement subject to what is otherwise stipulated in
this Section 6, and only for the purposes specified in Appendix 1.
6.2. Change in Subcontractor. The Supplier has the right to terminate a Subcontractor or
engage other appropriate and reliable Subcontractors, provided that the rules in Section
6 are applied. Before engaging a new Subcontractor, the Supplier shall notify the
Customer in writing of the new Subcontractor and shall endeavor, where this is possible,
to provide such notice not less than fourteen (14) days prior to the engagement in
question. Upon receipt of such notice, the Customer has a right to object to the new
Subcontractor in accordance with Section 6.4.
6.3. Contractual obligation. The Supplier is responsible for ensuring that all Processing of
Personal Data performed by a Subcontractor is governed by a written agreement with
the Subcontractor that corresponds to the requirements of this Data Processor
Agreement.
6.4. Objections. If Customer has cause to object to a Subcontractor, the Customer shall
notify the Supplier of this in writing. If the Customer wishes to exercise its right under
Section 6.2 to object to a proposed new Subcontractor, then the Customer shall notify
the Supplier in writing within ten (10) days of receipt of the Supplier's notice.
6.5. Resolution of objections. In the event that the Customer has objected to a
Subcontractor in accordance with Section 6.4 above, the parties shall discuss various
activities to resolve the reason for the Customer's objection. If the parties cannot agree
on any solution within a reasonable period of time, which shall not exceed thirty (30)
days, the Customer may terminate the Main Agreement and this Processor Agreement
by notifying the Supplier in writing. The Supplier is under no obligation to refund any
payments made in advance for the agreed services under the Main Agreement.
6.6. Supplier’s responsibility. The Supplier is responsible for the Subcontractor's
Processing of Personal Data under the Main Agreement and is fully responsible for
Subcontractors who do not fulfil their obligations according to the Data Processor
Agreement.
6.7. List of Subcontractors. The Supplier shall maintain a list of all Subcontractors who
process Personal Data in connection with the Main Agreement and shall send a copy of
the list upon the Customer’s request. The Subcontractors currently appointed are listed
in Appendix 1.
7. AUDITS
7.1. Customer’s right to perform an audit. The Supplier shall provide the Customer and
Customer’s independent auditors with access to such information and Supplier’s
premises as may reasonably be necessary for the Customer to be able to verify that the
Supplier is fulfilling its obligations according to this Data Processor Agreement.
The Customer shall, within a reasonable period of time (at least thirty (30) days), notify
the Supplier before such an audit unless otherwise required by a government authority,
or the Customer has reason to suspect that the Supplier or a Subcontractor is not
fulfilling its obligations according to the Data Processor Agreement. The Customer and
any persons conducting an audit, must enter into adequate confidentiality undertakings
prior to such audit and must furthermore adhere to the Supplier´s security requirements
at the site where the audit shall be conducted. The audit must furthermore, in so far as
possible, be conducted so as not to disturb the Supplier´s business operations or
jeopardise the security of information belonging to other customers. Notwithstanding the
foregoing, the Customer will primarily rely on applicable existing audit reports or other
available verification, if any, to confirm the Supplier’s compliance hereunder and to
avoid unnecessary repetitive audits; unless required by Data Protection Laws, audits
will not be made more than once in any twelve-month period. An audit shall not grant
the Customer access to trade secrets or proprietary information unless required to
comply with Data Protection Laws (and the Supplier will never be obliged, with regard to
any information request or audit, to provide access to any price or other commercial
information).
7.2. Audit results. If an audit has shown that the Supplier or a Subcontractor has not
fulfilled its obligations according to the Data Processor Agreement, the Supplier shall
promptly manage and correct this. Such corrective action does not affect the
Customer's other possible claims and rights under the Data Processor Agreement.
7.3. Remuneration. The Supplier is entitled to remuneration on a time and material basis for
any work performed assisting the Customer in performing an audit.
8. INCIDENTS AND NOTIFICATION OF SECURITY BREACHES
8.1. Incident management. Subject to its adopted administrative procedures and quality
management system, the Supplier shall evaluate and act upon events suspected of
possibly resulting in unauthorised access or Processing of Personal Data (“Incidents”).
If there is a risk that the Incident may lead to unplanned or illegal deletion, loss,
alteration or release to unauthorised persons, the Supplier shall promptly notify the
Customer of the Incident and provide all relevant information related to the Incident. The
Supplier shall develop appropriate steps to manage the Incident and cooperate with the
Customer when appropriate to protect the Personal Data, with the aim of restoring the
confidentiality, privacy and availability of the Personal Data.
8.2. Security Breach. The Supplier shall promptly notify the Customer and confirm that the
notification was received as soon as a Security Breach is discovered that could pose or
could have posed a risk to the Personal Data Processed under this Data Processor
Agreement. The Supplier shall promptly investigate the Security Breach and take
measures to reduce the damage, identify the basic problem and prevent it from
happening again. The Customer shall be updated with relevant information related to
the Security Breach and the Supplier's work on the breach while the work is proceeding,
and the Supplier shall cooperate with the Customer when appropriate to reduce the
damage and protect the privacy of the Data Subjects.
9. RETURN AND DELETION OF PERSONAL DATA
9.1. Return and deletion. Within thirty (30) days of expiration of the Main Agreement, the
Supplier shall delete all Personal Data that the Supplier Processed under this Data
Processor Agreement, including Personal Data managed in backups and the like.
Before deletion, the Supplier shall, upon the Customer's request, return all Personal
Data that the Supplier Processed under the Data Processor Agreement.
10. LIABILITY AND LIMITATION OF LIABILITY
10.1. Damages and penalties. The Supplier is only liable for claims and damages from a
Data Subject or a third party and administrative penalties from an authority targeting the
Customer or otherwise, where the Supplier or a Subcontractor fails to fulfil its
obligations according to the Data Processor Agreement and relevant Data Protection
Laws.
The Customer shall indemnify the Supplier with respect to any claims and damages
from a Data Subject or a third party and administrative penalties from an authority
caused by the Customer.
10.2. Limitation of liability. The Supplier’s aggregate liability under this Data Processor
Agreement shall under no circumstances exceed fifty (50) per cent of the remuneration
received under the Main Agreement during a period of twelve (12) months immediately
preceding the occurrence of the event upon which liability is based.
11. TRANSFER OF PERSONAL DATA
11.1. The Processing activities (including storage) shall take place as set out herein (including
by Subcontractors as set out in Appendix 1). It is acknowledged that the Supplier, either
itself or using Subcontractors, as part of the services, need to perform services from
locations in countries and territories outside the EEA, either directly or via onward
Transfer by the Supplier, acting itself and/or through permitted Subcontractors being
non-EEA entities. The Customer (for its own part and on behalf of other Controllers
referenced herein being established in the EEA) gives its general written authorization
and instruction to the Supplier for the purposes of conducting Transfers outside EEA
when providing the services under the Main Agreement from locations outside the EEA,
as set forth below.
11.2. The Supplier or its Subcontractors may Process Personal Data outside the EU/EEA
only if:
a) The recipient has been deemed by the EU Commission to guarantee an adequate
level of protection of the Personal Data (e.g. through certification, framework or
other arrangement), or;
b) The Supplier or its Subcontractor has provided appropriate safeguards pursuant to
article 46 of the GDPR, or;
c) The transfer and rights and freedoms of the data subjects are protected through
approved Binding Corporate Rules pursuant to Article 47 of the GDPR, or;
d) The transfer and rights and freedoms of the data subjects are protected through
the Standard Contractual Clauses together with; as the case may be, as
appropriate;
e) Appropriate measures having been adopted in conformity with applicable EU
recommendations or guidelines (including those issued by European Data
Protection Board; EDPB).
11.3. Subject to Clause 11.2 d) above and starting 27 September 2021, the Supplier will rely
on the SCCs for Transfers of Personal Data to Subcontractors established in a country
outside the EEA. By incorporating model contract clauses in Appendix 3 (including its
Annexes I – III) into this Data Processing Agreement established between the parties,
Personal Data processed by the Supplier (or its Subcontractors) is considered
adequately protected when Transferred outside the EEA or to countries which are not
covered by an adequacy decision pursuant to Clause 11.2 a) above. For transfers of
Personal Data outside of the UK, the parties will, for adequate protection, in addition,
rely on the UK Addendum, as also set out in Appendix 3.
APPENDIX 1
1. DATA SUBJECTS
The processing of personal data under the Data Processor Agreement applies to the following
categories of data subjects:
● The authorised users of the Customer who access the service.
● Identifiable persons in Video, Images or other media files or metadata.
2. CATEGORIES OF PROCESSED DATA
● Web browser User-Agent string
● User email
● User id (UUID)
● User first name
● User last name (Optional)
● User phone number (Optional)
● User photo (Optional)
● User group membership
● User type in iconik (Power, Standard, Browse, or Admin user type)
● Video, sound, images and other personal data pertaining to identifiable persons in
Customer´s media files or metadata
● IP addresses
3. PURPOSE, NATURE, OBJECTIVE AND DURATION OF THE PROCESSING
The Customer is the party that decides on the purpose of the Processing of Personal Data under
the Main Agreement. The purpose of the Processing of Personal Data by the Supplier is limited to
a) Providing the agreed services such as the provision of software services, consulting
services, maintenance, support and other services in accordance with the Main
Agreement;
b) Implementing, managing and monitoring any underlying infrastructure required to provide
services under the Main Agreement and to fulfil the stipulated technical and organisational
requirements for the protection of Personal Data;
c) Communicating with the Customer and Customer’s personnel;
d) Implement the Customer’s Instructions in accordance with Section 3.4; and
e) Handling service problems, Incidents or Security Breaches.
f) The Supplier is entitled to use information about the use of the services for business
development purposes or for example, but not limited to, providing benchmarking
information or other value adding features that can be included in the services. However,
the Supplier is bound to only show aggregated, unidentifiable information that can’t be
attributed to an individual Customer or individual User. The Customer is entitled to not
include their data in such value adding features but will then not be able to use such
functions.
The duration of the Processing is limited to the duration of the Main Agreement.
4. TRANSFER OF PERSONAL DATA TO A THIRD COUNTRY
We operate a global infrastructure and process data in both EU and US-based servers. We comply
with regulations for safeguarding any transfers of personal data outside of the EU.
5. LIST OF SUB-CONTRACTORS
Country of Processing Brief description of
Subcontractor
Jurisdiction Jurisdiction processing
Iconik, Inc. United States United States See Appendix 1, 1-5.
Address:
450 Bedford Street,
Suite 2200,
Lexington, MA 02420
United States1
privacy@iconik.io
Iconik Media AB Sweden Sweden See Appendix 1, 1-5.
Address:
Kivra: 559208-7695,
SE-106 31 Stockholm,
Sweden1
privacy@iconik.io
Google Ireland Limited Ireland European Union Google Cloud Platform is
Address: and United States where the core Service is
Gordon House, hosted for customers who
Barrow Street, chose to host their
Dublin 4, instances in Google Cloud.
Ireland Data is replicated between
https://support.google.com/clo Europe and the USA in
ud/contact/dpo
real time.
Google Analytics is used to
track web analytics.
Google Video Intelligence
(GVI) is the default image
and video analytics service
in iconik that is used when
a user requests analysis of
a specific video file.
Amazon Web Services, United States European Union AWS is where the core
Inc. and United States Service is hosted for
Address: customers who chose to
410 Terry Avenue North host their instances on
Seattle, WA 98109-5210 AWS. Data is replicated
Attn: AWS Legal between Europe and the
https://aws.amazon.com/conta USA in real time.
ct-us/compliance-support/
1
When not acting as Supplier/Processor under the Main Agreement.
Twilio, Inc. United States United States SendGrid (a Twilio
Address: product) is used to send
101 Spear St Fl 1, emails on various Service
San Francisco, notifications to users.
CA, 94105-1580
Segment.io (a Twilio
United States
support@twilio.com product) is used to
measure product usage
analytics, specifically to
help us track which
features of the product are
being used to be able to
focus our development in
those areas.
Functional Software, Inc. United States European Union Sentry (a Functional
Address: Software product) is used
132 Hawthorne St for monitoring and error
San Francisco, tracking.
CA 94107-1308
United States
https://sentry.io/contact/enterp
rise/
Stripe Payments Europe, Ireland European Union Stripe is used to manage
Ltd. billing, credit card
Address: information, and invoicing.
c/o A&L Goodbody Ifsc
North Wall Quay
Dublin
D01 H104 Ireland
dpo@stripe.com
Rev.com, Inc. United States United States Rev is used when a user
Address: requests a transcription of
222 Kearny St, 8 Fl a specific video or audio
San Francisco, CA file.
94108 United States
support@rev.ai
Mixpanel, inc. US. United States European Union Mixpanel is used to
Address: measure product usage
One Front Street, 28th Floor analytics, specifically to
San Francisco, CA 94111 help us track which
United States features of the product are
compliance@mixpanel.com being used to be able to
focus our development in
those areas.
Crowdstrike, Inc. United States European Union Crowdstrike provides
Address: and United States security services for iconik
150 Mathilda Place, 3rd Floor (all processing is including real-time
Sunnyvale, CA 94086 done in the iconik monitoring of our
datacenters) infrastructure.
legal@crowdstrike.com
Orca Security, Inc. United States European Union Orca Security is used to
Address: and United States provide automated risk
2175 NW Raleigh St, Suite (all processing is analysis and vulnerability
110, Portland, OR 97210 done in the same scanning of the iconik
region as the infrastructure.
privacy@orca.security
iconik data)
SFDC Ireland, Ltd. England United States Salesforce is used for
Legal Department - Level 1, sales and marketing
Block A, Nova Atria North, related activities.
Salesforce is given access
Sandyford Business District,
to contact information,
Dublin
including name and email
18, Ireland address for prospective
privacy@salesforce.com and current customers.
Hubspot, Inc. United States United States Hubspot is used for
Address: marketing related
25 First Street, 2nd Floor, activities.
Cambridge, MA 02141, USA
https://preferences.hubspot.co
m/privacy
Zendesk United States United States Zendesk is used to provide
989 Market Street, San customer support.
Francisco, California 94103
U.S.A.
Attn: Legal Department
legalnotice@zendesk.com
Klaviyo, Inc. United States United States Klaviyo is used for
125 Summer Street, Floor 6, marketing related
Boston, MA, 02110, activities.
United States
privacy@klaviyo.com
Growthbook, Inc. United States United States Growthbook is used for
1950 W Corporate Way A/B testing in iconik for the
#34560 purpose of understanding
Anaheim, CA 92801 how users are using our
United States products and how we may
privacy@growthbook.io improve them.
APPENDIX 2 – TECHNICAL AND ORGANISATIONAL SECURITY MEASURES
1. TECHNICAL AND ORGANISATIONAL MEASURES – GENERAL; ENCRYPTION
Supplier shall take the technical and organisational measures for the protection of the personal
data that are appropriate with regard to the sensitivity of the personal data; the particular risks that
exist; existing technical capabilities and the costs of implementing the measures. The personal
data shall be protected from any type of unauthorized processing such as change, destruction or
unauthorised access and dissemination. Supplier, accordingly, undertakes to take all measures
stipulated in Article 32 of the GDPR. The technical and organisational measures we have
implemented are summarized below.
Encryption
Encryption is a major component to help ensure the authenticity, integrity, and privacy of data at
rest (Assets, Data, System logs) and in transit (Access, Assets, Email). iconik will comply with the
following requirements:
Access
iconik forces using HTTPS, HTTP2 or WSS. No authenticated connection is allowed via
unencrypted HTTP or WS protocols.
iconik only uses TLS or QUIC.
All external network communication is encrypted.
We have audited the details such as the certificates we use and their effectiveness and that they
conform to the latest standards and that we use TLS 1.2 or better.
Assets
All assets that are stored in iconik provided storage are secured and encrypted using AES-256 and
are transferred using either HTTPS or QUIC Protocol.
When viewing or transferring assets iconik use time limited signed URLs which are created on
request, making sure the requestor is authenticated, has the correct roles and permissions to
access or upload the file being requested.
iconik's internal access to assets is authenticated internally and uses TLS.
Data
All data in iconik is stored with Encryption at Rest. Our internal databases and search services are
backed with SSD drives with AES-256 with integrity and replicated across multiple devices and
geographic locations.
We do not store credit card or sensitive billing information internally, instead using Stripe to perform
these services.
All data stored in the iconik-managed domain is backed up to separate geographical locations and
stored on encrypted storage. We backup the database, Elasticsearch, and all media (originals,
proxies, and keyframes) stored in the iconik-managed storages except for regional buckets. All
backups are removed after 30 days.
System logs
System logs are stored and secured in buckets with AES-256 encryption. Logs are anonymised
and stored for 30 days to be able to detect any anomalies.
Email
All outbound email from iconik is sent securely to a third-party email service using HTTPS. When
sharing assets to external parties, an email will be sent which contains a limited access key which
gives the sharing recipient access to that asset or collection of assets. Due to the nature of email
this key can be sent in clear-text when the email is passed between email servers. This is outside
of iconik’s control.
Bring your own bucket
When you add your own Storage bucket to iconik it is your responsibility to make sure that the
storage meets your security needs. To make your storage more secure we recommend following
the security guidelines in our knowledge base.
2. SECURITY CONTROLS
iconik will comply with the following requirements to provide control over your media, by whom it's
accessed and how it's accessed.
Role based Access Control
Every access to APIs and the User Interface is enabled by Roles enabled on User Groups. You can
define exactly what actions different groups are allowed to perform and this is enforced both on the
Web-GUI level and via the APIs that the Web-GUI and third-parties can use.
ACLs
All content and collection of content is controlled by Access Control Lists defining exactly which
users and groups of users are allowed access to what assets, and what access level they are
allowed.
External Sharing
Users with the role to share out content can define what is shared, how long it is shared for and
what access the external user has when sharing. External Sharing can be disabled for iconik with
Admin Settings.
Support Access
By default, iconik support personnel can access your system domain and data on your behalf in
order to provide support. You can enable and disable iconik support’s access to your iconik account
giving us access when needed to identify problems.
API
All API requests are authenticated using App-ID and Token pairs which allows each API client to
use a separate set of authentication tokens.
3. HYBRID SECURITY
In Hybrid Cloud models, the iconik Storage Gateway (ISG) is deployed onto on premise networks.
ISG is responsible for managing files and storage for iconik. No communication or control can be
instigated from iconik to ISG and all communication is instigated from the ISG up to iconik. This
means that ISG does not have to be open from the outside world whilst living on your network.
Firewalling
The ISG can be firewalled so that no incoming connection can be established. It only needs
outbound HTTPS port 443 open for communicating with the iconik Cloud Service.
VPNs
No VPNs are needed in the standard security model for iconik.
4. NETWORK SECURITY
iconik operates its network in a secure manner on top of Global Cloud leaders such as Amazon
AWS and Google Cloud building upon their best practices. This provides it with Denial of Service
Protection, and best in class operational and physical security.
Intrusion Detection
The iconik network is built upon sophisticated intrusion detection from our cloud suppliers that use
Machine Intelligence and proactive support for monitoring and responding to intrusion attempts. We
also contract with Orca Security to perform vulnerability and risk analysis of our infrastructure and
Crowdstrike to perform malware and intrusion detection and prevention.
Secure Access
We limit all access to iconik production environments internally to the engineers that need access
from a secure environment using two-factor authentication, access controls and secure accounts
using application level access management. The internal networks at the iconik office have no
access to any iconik production environments.
iconik testing environments and other environments are fully separated from the main production
environments by accounts, location, access control and network connectivity.
Logging
iconik logs all API calls and all operations performed on iconik for internal auditing processes into
secured logging environments. The same Encryption at Rest is applied to log files as other files
and data on iconik. Audit logs are stored for 12 months to be able to investigate security related
issues.
External Auditing
iconik uses the services of a third-party company to perform tests to independently audit its
security.
For details on our security measures see https://app.iconik.io/help/pages/security/
____________________________________________
This text was last updated 28 August 2024
APPENDIX 3 – Transfer of Personal Data outside the EEA and/or the UK pursuant to Clause
11.2 d) in the Data Processing Agreement
This Appendix 3 incorporates by reference the SCCs (PART A) and the UK GDPR Addendum
(PART B). The SCCs and the UK GDPR Addendum have been pre-signed by iconik as the data
importer. The parties agree that the SCCs and the UK GDPR Addendum shall govern any
Transfers (out of the EEA) of Personal Data protected by the GDPR and/or transfers out of the UK
of Personal Data protected by the UK GDPR, as and when applicable.
__________
PART A
STANDARD CONTRACTUAL CLAUSES (“SCCs”/”EU SCCs”)
The parties acknowledge and agree that the following provisions will apply with respect to
Transfers of Personal Data protected by the GDPR.
COMMISSION IMPLEMENTING DECISION (EU) 2021/914 of 4 June 2021 on standard
contractual clauses for the transfer of personal data to third countries pursuant to Regulation (EU)
2016/679 of the European Parliament and of the Council.
STANDARD CONTRACTUAL CLAUSES – Module 2: MODULE TWO:
Transfer controller to processor. The full text of the Module 2: Transfers Controller to Processor is
available at: https://eurlex.europa.eu/eli/dec_impl/2021/914/oj?uri=CELEX:32021D0914&locale=en
Completed and individualised SCCs, as well as Annexes I-III to the SCCs, are provided below.
In relation to Personal Data protected by the GDPR, the SCCs will apply completed as follows:
(i) Module Two will apply;
(ii) in Clause 7, the optional docking clause shall not apply;
(iii) in Clause 9, Option 2 “General Authorisation” will apply, and the time period for prior notice of
sub-processor changes shall be 14 days. The Subcontractors currently appointed are listed in
Appendix 1.
(iv) in Clause 11 a), the optional language will not apply;
(v) in Clause 17, Option 1 will apply, and the SCCs will be governed by Swedish law;
(vi) in Clause 18(b), disputes shall be resolved before the courts of Sweden;
(vii) Annex I of the SCCs shall be deemed completed with the information set out in Annex I below;
and
(viii) Annex II of the SCCs shall be deemed completed with the information set out in Annex II
below.
ANNEX I TO THE SCCs
A. LIST OF PARTIES
Data Controller: For the purposes of the Standard Contract Clauses, and subject to the terms of
the Data Processor Agreement, the Customer is identified as Data Controller, as defined in Data
Protection Laws.
Data Processor: For the purposes of the Standard Contract Clauses, and subject to the terms of
the Data Processor Agreement, the Supplier is identified as Data Processor, as defined in Data
Protection Laws.
Data exporter(s): For the purposes of the Standard Contract Clauses, and subject to the terms of
the Data Processor Agreement, the Customer is Data exporter. The activities relevant to the data
transferred under these Clauses are set out in Appendix 1 to the Data Processor Agreement.
The Customer’s / Data exporter’s contact details, key contact person and signature are specified in
the Main Agreement.
Data importer(s): For the purposes of the Standard Contract Clauses, and subject to the terms of
the Data Processor Agreement, the Supplier is defined as Data importer. The activities relevant to
the data transferred are set out in Appendix 1 to the Data Processor Agreement.
The Supplier’s / Data importer’s contact details, key contact person and signature are set out in the
Main Agreement.
B. DESCRIPTION OF TRANSFER
Categories of data subjects whose personal data is transferred is set out in Appendix 1 to the Data
Processing Agreement between the Customer (Data Controller) and the Supplier (Data Processor).
Categories of personal data transferred is set out in Appendix 1 to the Data Processing Agreement
between the Customer (Data Controller) and the Supplier (Data Processor).
No sensitive data, within the meaning of the Data Protection Laws, is known to be transferred.
The frequency of the transfer (e.g. whether the data is transferred on a one-off or continuous
basis).
Data is continually transferred in real-time between iconik´s data centers in EU and US.
Nature of the processing
See Appendix 1, Section 3
Purpose(s) of the data transfer and further processing
Data is transferred between EU and US in order to provide data replication and protection from
natural disasters, as well as making sure the data is as close to the user as possible. Users are
directed to the closest data center using our Geo-based global load-balancers.
The period for which the personal data will be retained, or, if that is not possible, the criteria used to
determine that period
Data is retained as long as the Customer has an active account and has not instructed the Supplier
to delete the data via the relevant user interface or API interactions. Once data has been deleted
the Supplier maintains backup copies of data for 30 days until the backup copies are automatically
purged.
For transfers to (sub-)processors, also specify subject matter, nature and duration of the
processing: See Appendix 1, Section 5
C. COMPETENT SUPERVISORY AUTHORITY
Identify the competent supervisory authority/ies in accordance with Clause 13: the Swedish
Authority for Privacy Protection (www.imy.se), unless another Member State’s competent
supervisory authority is identified in accordance with Clause 13.
ANNEX II TO THE SCCs - TECHNICAL AND ORGANISATIONAL MEASURES INCLUDING
TECHNICAL AND ORGANISATIONAL MEASURES TO ENSURE THE SECURITY OF THE
DATA
iconik’s technical and organizational measures are set out in Appendix 2 to the Data Processing
Agreement.
ANNEX III TO THE SCCs – LIST OF SUB-PROCESSORS
The Controller has authorised the use of the following sub-processors:
● Sub-processors to the Supplier: please see Appendix 1 to the Data Processor Agreement.
● Sub-processors to the Subcontractor: please refer to Appendix 1 and/or relevant
sub-processor contract.
The period for which the personal data will be retained, or, if that is not possible, the criteria used to
determine that period: please see Appendix 1.
For transfers to (sub-)processors, also specify subject matter, nature and duration of the
processing: please see Appendix 1.
PART B
UK GDPR ADDENDUM
This Addendum forms part of a Main Agreement and a Data Processing Agreement, including the
Addendum EU SCCs, entered into between iconik and Customer. The Addendum applies with
regard to UK GDPR (as applicable).
The Addendum conforms to the international data transfer addendum issued by the UK ICO for
parties making Restricted Transfers (as defined below) and is aimed to provide Appropriate
Safeguards (as also defined below) for Restricted Transfers. The Addendum is incorporated in the
Data Processing Agreement and the Main Agreement. In the event of conflicting provisions among
documents, the terms of the Addendum shall - subject to Part 2, clause 10, below - prevail with
respect to its area of application.
Part 1: Tables
Table 1: Parties
Start date the effective date of the Data Processing Agreement.
xporter (who sends the
E Importer (who receives the
The Parties
Restricted Transfer) Restricted Transfer)
Parties’ details he parties’ (Data exporter and Data importer) contact details are
T
specified in the Main Agreement.
Key Contact he parties’ (Data exporter and Data importer) key contact persons are
T
specified in the Main Agreement.
ignature (if
S he parties’ (Data exporter and Data importer) signatures are set out in
T
required for the the Main Agreement.
purposes of
Section 2)
Table 2: Selected SCCs, Modules and Selected Clauses
ddendum EU
A ☒ The version of the Approved EU SCCs which this Addendum is
SCCs appended to, detailed below, including the Appendix Information:
he EU SCCs to which this Addendum is appended to are contained in
T
PART A of Appendix 3 to the Data Processing Agreement.
☐ the Approved EU SCCs, including the Appendix Information and with
only the following modules, clauses or optional provisions of the
Approved EU SCCs brought into effect for the purposes of this
Addendum:
Module odule in
M lause 7
C lause 11
C lause 9a
C lause 9a
C Is personal data
operation (Docking (Option) (Prior (Time received from the
Clause) Authorisatio period) Importer combined
n or General with personal data
Authorisatio collected by the
n) Exporter?
1
2 Module 2 Omitted he
T eneral
G 14 days Yes
optional authorisatio
language n
will not
apply
3
4
Table 3: Appendix Information
“Appendix Information” means the information which must be provided for the selected modules
as set out in the Appendix of the Approved EU SCCs (other than the Parties), and which for this
Addendum is set out in:
Annex 1A: List of Parties: List of parties as set out in Annex 1A to the Approved EU SCCs.
nnex 1B: Description of Transfer: Description of transfer as set out in Annex 1B to the
A
Approved EU SCCs.
nnex II: Technical and organisational measures including technical and organisational
A
measures to ensure the security of the data: as set out in Annex II to the Approved EU SCCs.
nnex III: List of Sub processors (Modules 2 and 3 only): as set out in Annex III and Appendix 1
A
to the Data Processing Agreement.
Table 4: Ending this Addendum when the Approved Addendum Changes
nding this
E Which Parties may end this Addendum as set out in Section 19:
Addendum
☐ Importer
when the
Approved ☐ Exporter
☒ neither Party
Addendum
changes
Part 2: Mandatory Clauses
Entering into this Addendum
1. Each Party agrees to be bound by the terms and conditions set out in this Addendum, in
exchange for the other Party also agreeing to be bound by this Addendum.
2. Although Annex 1A and Clause 7 of the Approved EU SCCs require signature by the Parties,
for the purpose of making Restricted Transfers, the Parties may enter into this Addendum in
any way that makes them legally binding on the Parties and allows data subjects to enforce
their rights as set out in this Addendum. Entering into this Addendum will have the same effect
as signing the Approved EU SCCs and any part of the Approved EU SCCs.
Interpretation of this Addendum
3. Where this Addendum uses terms that are defined in the Approved EU SCCs those terms shall
have the same meaning as in the Approved EU SCCs. In addition, the following terms have the
following meanings:
Addendum his International Data Transfer Addendum which is made up of this
T
Addendum incorporating the Addendum EU SCCs.
Addendum EU SCCs he version(s) of the Approved EU SCCs which this Addendum is
T
appended to, as set out in Table 2, including the Appendix
Information.
Appendix Information As set out in Table 3.
Appropriate Safeguards he standard of protection over the personal data and of data
T
subjects’ rights, which is required by UK Data Protection Laws when
you are making a Restricted Transfer relying on standard data
protection clauses under Article 46(2)(d) UK GDPR.
Approved Addendum he template Addendum issued by the ICO and laid before
T
Parliament in accordance with s119A of the Data Protection Act
2018 on 2 February 2022, as it is revised under Section 18.
Approved EU SCCs he Standard Contractual Clauses set out in the Annex of
T
Commission Implementing Decision (EU) 2021/914 of 4 June 2021.
ICO The Information Commissioner.
Restricted Transfer A transfer which is covered by Chapter V of the UK GDPR.
UK The United Kingdom of Great Britain and Northern Ireland.
UK Data Protection Laws ll laws relating to data protection, the processing of personal data,
A
privacy and/or electronic communications in force from time to time
in the UK, including the UK GDPR and the Data Protection Act
2018.
UK GDPR As defined in section 3 of the Data Protection Act 2018.
4. This Addendum must always be interpreted in a manner that is consistent with UK Data
Protection Laws and so that it fulfils the Parties’ obligation to provide the Appropriate
Safeguards.
5. If the provisions included in the Addendum EU SCCs amend the Approved SCCs in any way
which is not permitted under the Approved EU SCCs or the Approved Addendum, such
amendment(s) will not be incorporated in this Addendum and the equivalent provision of the
Approved EU SCCs will take their place.
6. If there is any inconsistency or conflict between UK Data Protection Laws and this Addendum,
UK Data Protection Laws applies.
7. If the meaning of this Addendum is unclear or there is more than one meaning, the meaning
which most closely aligns with UK Data Protection Laws applies.
8. Any references to legislation (or specific provisions of legislation) means that legislation (or
specific provision) as it may change over time. This includes where that legislation (or specific
provision) has been consolidated, re-enacted and/or replaced after this Addendum has been
entered into.
Hierarchy
9. Although Clause 5 of the Approved EU SCCs sets out that the Approved EU SCCs prevail over
all related agreements between the parties, the parties agree that, for Restricted Transfers, the
hierarchy in Section 10 will prevail.
10. Where there is any inconsistency or conflict between the Approved Addendum and the
Addendum EU SCCs (as applicable), the Approved Addendum overrides the Addendum EU
SCCs, except where (and in so far as) the inconsistent or conflicting terms of the Addendum
EU SCCs provides greater protection for data subjects, in which case those terms will override
the Approved Addendum.
11. Where this Addendum incorporates Addendum EU SCCs which have been entered into to
protect transfers subject to the General Data Protection Regulation (EU) 2016/679 then the
Parties acknowledge that nothing in this Addendum impacts those Addendum EU SCCs.
Incorporation of and changes to the EU SCCs
12. This Addendum incorporates the Addendum EU SCCs which are amended to the extent
necessary so that:
a. together they operate for data transfers made by the data exporter to the data importer,
to the extent that UK Data Protection Laws apply to the data exporter’s processing
when making that data transfer, and they provide Appropriate Safeguards for those
data transfers;
b. Sections 9 to 11 override Clause 5 (Hierarchy) of the Addendum EU SCCs; and
c. this Addendum (including the Addendum EU SCCs incorporated into it) is (1) governed
by the laws of England and Wales and (2) any dispute arising from it is resolved by the
courts of England and Wales, in each case unless the laws and/or courts of Scotland
or Northern Ireland have been expressly selected by the Parties.
13. Unless the Parties have agreed alternative amendments which meet the requirements of
Section 12, the provisions of Section 15 will apply.
14. No amendments to the Approved EU SCCs other than to meet the requirements of Section 12
may be made.
15. The following amendments to the Addendum EU SCCs (for the purpose of Section 12) are
made:
a. References to the “Clauses” means this Addendum, incorporating the Addendum EU
SCCs;
b. In Clause 2, delete the words:
“and, with respect to data transfers from controllers to processors and/or
processors to processors, standard contractual clauses pursuant to Article 28(7) of
Regulation (EU) 2016/679”;
c. Clause 6 (Description of the transfer(s)) is replaced with:
“The details of the transfers(s) and in particular the categories of personal data that
are transferred and the purpose(s) for which they are transferred) are those
specified in Annex I.B where UK Data Protection Laws apply to the data exporter’s
processing when making that transfer.”;
d. Clause 8.7(i) of Module 1 is replaced with:
“it is to a country benefitting from adequacy regulations pursuant to Section 17A of
the UK GDPR that covers the onward transfer”;
e. Clause 8.8(i) of Modules 2 and 3 is replaced with:
“the onward transfer is to a country benefitting from adequacy regulations pursuant
to Section 17A of the UK GDPR that covers the onward transfer;”
f. References to “Regulation (EU) 2016/679”, “Regulation (EU) 2016/679 of the European
Parliament and of the Council of 27 April 2016 on the protection of natural persons with
regard to the processing of personal data and on the free movement of such data
(General Data Protection Regulation)” and “that Regulation” are all replaced by “UK Data
Protection Laws”. References to specific Article(s) of “Regulation (EU) 2016/679” are
replaced with the equivalent Article or Section of UK Data Protection Laws;
g. References to Regulation (EU) 2018/1725 are removed;
h. References to the “European Union”, “Union”, “EU”, “EU Member State”, “Member State”
and “EU or Member State” are all replaced with the “UK”;
i. The reference to “Clause 12(c)(i)” at Clause 10(b)(i) of Module one, is replaced with
“Clause 11(c)(i)”;
j. Clause 13(a) and Part C of Annex I are not used;
k. The “competent supervisory authority” and “supervisory authority” are both replaced with
the “Information Commissioner”;
l. In Clause 16(e), subsection (i) is replaced with:
“the Secretary of State makes regulations pursuant to Section 17A of the Data
Protection Act 2018 that cover the transfer of personal data to which these clauses
apply;”;
m. Clause 17 is replaced with:
“These Clauses are governed by the laws of England and Wales.”;
n. Clause 18 is replaced with:
“Any dispute arising from these Clauses shall be resolved by the courts of England
and Wales. A data subject may also bring legal proceedings against the data
exporter and/or data importer before the courts of any country in the UK. The
Parties agree to submit themselves to the jurisdiction of such courts.”; and
o. The footnotes to the Approved EU SCCs do not form part of the Addendum, except for
footnotes 8, 9, 10 and 11.
Amendments to this Addendum
16. The Parties may agree to change Clauses 17 and/or 18 of the Addendum EU SCCs to refer to
the laws and/or courts of Scotland or Northern Ireland.
17. If the Parties wish to change the format of the information included in Part 1: Tables of the
Approved Addendum, they may do so by agreeing to the change in writing, provided that the
change does not reduce the Appropriate Safeguards.
18. From time to time, the ICO may issue a revised Approved Addendum which:
a. makes reasonable and proportionate changes to the Approved Addendum, including
correcting errors in the Approved Addendum; and/or
b. reflects changes to UK Data Protection Laws;
The revised Approved Addendum will specify the start date from which the changes to the
Approved Addendum are effective and whether the Parties need to review this Addendum
including the Appendix Information. This Addendum is automatically amended as set out in
the revised Approved Addendum from the start date specified.
19. If the ICO issues a revised Approved Addendum under Section 18, if any Party selected in
Table 4 “Ending the Addendum when the Approved Addendum changes”, will as a direct result
of the changes in the Approved Addendum have a substantial, disproportionate and
demonstrable increase in:
a its direct costs of performing its obligations under the Addendum; and/or
b its risk under the Addendum,
and in either case it has first taken reasonable steps to reduce those costs or risks so that it is not
substantial and disproportionate, then that Party may end this Addendum at the end of a
reasonable notice period, by providing written notice for that period to the other Party before
the start date of the revised Approved Addendum.
20. The Parties do not need the consent of any third party to make changes to this Addendum, but
any changes must be made in accordance with its terms.
_________________________
The SCCs and the UK GDPR Addendum set out in this Appendix 3 will become legally binding
between the parties upon entering into of the Main Agreement and the Data Processing Agreement
and, in any event, Supplier’s continued Processing of the Personal Data shall constitute
acceptance of the terms contained herein.
On behalf of the Customer: as per the Main Agreement
Name (written out in full): as per the Main Agreement
Position: as per the Main Agreement
Signature: as per the Main Agreement
____________________________________
On behalf of iconik: as per the Main Agreement
Name (written out in full): as per the Main Agreement
Position: as per the Main Agreement
Signature: as per the Main Agreement